Beckhoff Automation GmbH & Co. KG TX1200 — 10.1.4.4 Special input possibilities for operating versions

Visualization Now mark the second reference of 'visu' and (like described for the first one) replace 'FUB' by 'PLC_PRG.inst_2'. Now in online mode the values of the variables which are used to configure the two instances of 'fu' will be visualized in the corresponding reference of 'visu'. Of course the placeholder $FUB$ can be used at all places in the configuration of 'visu' where variables or text strings are entered. 10.1.4.4 Special input possibilities for operating versions The TwinCAT visualization can target specifically be used with TwinCAT Visualization or as Target- Visualization as a mere operating interface.

Then no menus and status and tool bars will be available to the user and no possibility to modify the code. Thus, when a visualization is created with TwinCAT for the purpose of being used as a 'operating version' the principal control and monitoring functions in a project must be assigned to visualization elements thus making them accessible via mouse click or keyboard in Online mode. See in the following some special input possibilities to configure visualization elements for the purpose of being used in TwinCAT Visualization. They are available in the configuration dialog for a visualization element:

Enter internal commands in the field Execute program in the category Input according to the following syntax INTERN [PARAMETER]* The following table shows the available internal commands. Some of them expect to receive several parameters, which are then entered separated by spaces. Optional parameters are enclosed in square brackets. For those commands which require that a Watch list be specified, a placeholder can be used instead of the direct name. If you enter several commands for one element, these are separated by commas. TX1200 304 Version: 1.3