Beckhoff Automation GmbH & Co. KG TX1200 — 10.2.2.2 Configuration

Visualization project variable. The XML-file describing the assignment to a text, must be linked to the project. ( (see "XML file for dynamic Texts) [ } 314] ). This is done in the visualization settings dialog. The XML-file must have a certain format, the particular texts are listed below the according Prefix-ID-combination and a language code is added. Thus the text display not only can switch between different contents but also between different languages. The desired language can be selected as described above for the Language file in the 'Settings' dialog, category 'Language':

So in order to get a dynamic text display, the following entries have to be made in the different configuration dialogs of a visualization Link the XML-file(s): Dialog 'Settings' category Language: Activate option Dynamic texts and press button Add, in order to link one or several XML-files, which are available on your system, to the project. The selected files will be listed in the window below the button. Press button Delete if you want to remove a selected file from the list. If you want to get displayed just those visualization elements, for which a dynamic text replacement is done, then activate option Hide elements, if no text replacement took place.

Selecting one of the language identifiers offered in the selection list at field Language will cause the display of that text versions (for the corresponding prefix-ID-combination) which are marked with that language identifier in the XML.-file. Configuration dialog Settings, category Language, for dynamic texts Define the ID in configuration dialog 'Variables' in field 'Textdisplay': Enter here a value (number) resp. a project variable which should define the ID of a text (as used in the XML-file). Define the text format in configuration dialog 'Text': In the Content field, insert a placeholder "% " at that position of the text, where you want to get displayed a dynamic text in online mode.

Instead of "PREFIX" you can enter any desired string. See the description for the 'Text' configuration dialog. For each prefix-ID-combination, which is found in a linked XML-file, the assigned text will be displayed in the visualization element in online mode. If no appropriate entry is found, no replacement will be done. TX1200 313 Version: 1.3