Visualization 3. Configure... In the Target Settings in tab 'Visualization' (it depends on the target system, whether the particular options are available in this dialog!) configure that the project should be prepared for use in the Target Visualization: Activate option ‘Target visualization’ Additionally here you can define whether the user inputs and the re-painting of the visualization elements.... ... should be controlled via VISU-tasks which are generated automatically or via individual programming: Activate option ' Deactivate task generation '. ... should be processed by one or by two POUs resp. tasks: Activate option 'Use VISU_INPUT_TASK '.
(Don't get irritated by the term "..._TASK" in this case; this option is also of effect if no VISU_INPUT_TASK is generated.) Thus, besides the possibility of deactivating the keyboard usage for table, the following configurations are possible: The Target visualization is controlled by VISU-tasks which are generated automatically and which call the POUs MAINTARGETVISU_PAINT_CODE and MAINTTARGETVISU_INPUT_CODE: Case A: Deactivate task generation is switched off: Use VISU_INPUT_TASK is activated: Automatically two tasks will be generated, each calling a program: VISU_TASK calls the implicitly available POU M AINTARGETVISU_PAINT_CODE , which does the repainting of the visualization elements.
VISU_INPUT_TASK calls the implicitly available POU MAINTARGETVISU_INPUT_CODE , which does the processing of the user inputs. The default settings of the tasks: - VISU_INPUT_TASK: cyclic, priority 2, interval t#50ms. - VISU_TASK: cyclic, priority 3, interval t#200ms. TX1200 326 Version: 1.3