Individual Components Desktop If you choose this category, then you get the following dialog box: Options dialog box of the category Desktop Tool bar If the option tool bar has been chosen, then the tool bar with the buttons for faster selection of menu commands becomes visible underneath the menu bar. Status bar If the option status bar has been chosen, then the status bar at the lower edge of the TwinCAT PLC Control main window becomes visible.
Online in security mode In Online mode with the commands 'Run', 'Stop', 'Reset' 'Toggle Breakpoint', 'Single cycle', 'Write values', 'Force values' and 'Release force', a dialog box appears with the confirmation request whether the command should really be executed. Query communication parameters before login As soon as the command 'Online' 'Login' is executed, first the communication parameters dialog will open. To get in online mode you must first close this dialog with OK. Do not save communication parameters in project The settings of the communication parameters dialog ('Online' 'Communication Parameters') will not be saved with the project.
Show print area margins In every editor window, the limits of the currently set print range are marked with red dashed lines. Their size depends on the printer characteristics (paper size, orientation) and on the size of the “Content” field of the set print layout (menu: 'File” “Documentation Settings”). F4 ignores warnings TX1200 48 Version: 1.3