Individual Components Use the tree-structured selection editor to mark the variables which should be entered in the symbol file. For this purpose you can select a POUs entry (e.g. Global Variables) which automatically will mark all variables belonging to this POU, or you can select single variables which you find listed for each POU in the tree. Then set the desired options in the lower part of the dialog box by clicking the mouse on the corresponding small boxes. Activated options are checked. The following options can be set: Export variables of object: The variables of the selected object are exported in the symbol file.
The following options can take effect only if the Export variables of object option is activated: Export data entries : Entries for access to the global variables are created for object's structures and arrays. Export structure components : An individual entry is created for each variable component of object's structures. Export array entries : An individual entry is created for each variable component of object's arrays. Write Access : Object's variables may be changed by the OPC server. Once the option settings for the currently selected POU are complete, other POUs can be also be selected and can be given an option configuration.
This can be carried out for any desired number of POU selections, one after the other. When the dialog box is closed by selecting OK , all configurations carried out since the dialog box was opened are applied. Database Connection This dialog is used to define whether the project should be managed in a project data base and to configure the ENI interface correspondingly. TX1200 57 Version: 1.3