Beckhoff Automation GmbH & Co. KG TX1200 — 4.3 Managing Projects

Individual Components If it is not a editor POU, but the task configuration, the target settings etc., then the POU version of the actual and the reference project can be opened in separate windows by a double click on the respective line in the project structure. For those project POUs no further details of differences will be displayed. Working in the compare mode (Menu 'Extras', Context menu): If the cursor is placed on a line in the bipartited window, which indicates a difference, the menu 'Extras' resp. The context menu offers a selection of the following commands, depending on whether working in the project overview or in a POU. 'Next difference'( ):

The cursor jumps to the next unit, where a difference is indicated. (line in project overview, line/network/element in POU) 'Previous difference'( ): The cursor jumps to the previous unit, where a difference is indicated . (line in project overview, line/network/element in POU) 'Accept change'( ): For all coherent (e.g. subsequent lines) units, which have the same sort of difference marking, the version of the reference project will be accepted for the actual project. The corresponding units will be shown (with the corresponding coloring) in the left side of the window.

If it is an unit, which is marked red (just modification), then the acceptance will be recognizable by yellow coloring of the text in the actual project. 'Accept changed item'( ): Only the single unit (line, network, element) where the cursor is currently placed, will be accepted for the actual version. The corresponding units will be shown (with the corresponding coloring) in the left side of the window. If it is an unit, which is marked red (just modification), then the acceptance will be recognizable by yellow coloring of the text in the actual project. ' Accept properties'(only in project overview):

The object properties for the POU, where the cursor is currently placed, will be accepted for the actual project as they are set in the reference version. 'Accept access rights' (only in project overview): The object access rights for the POU, where the cursor is currently placed, will be accepted for the actual project as they are set in the reference version . TX1200 82 Version: 1.3