TwinCAT Slave Axes Coupling factor 0.75, decoupling and aim for new end position against direction of travel. Interfaces System Manager PLC function blocks 3.2.4 Position compensation In the following sections, the dynamics and positioning specified by the coupling to the respective master will be referred to as basic dynamics and basic positioning . Position compensation is an additional positioning that is additively superimposed on the basic positioning. Over a certain distance (compensation length L ), additional positioning is carried out by a desired distance (compensation difference D ). The aim of slave axis position compensation is generally spatial synchronization with other axes.
Position compensation may be aborted via a compensation stop (continuous). Position compensation of slave axes is a variant of master axis position compensation [ } 20] . WARNING If the compensation difference D is negative (deceleration), (double) motion reversal is possible. General notes: 1. D may be negative. In this case, the overall positioning lags behind the basic positioning. 2. Compensation is complete once the distance L±D has been travelled. 3. Compensation is a linear path control , i.e. during compensation the slave axis will follow all the changes in basic dynamics (e.g. override 0.0 ). 4. During compensation, axis compensation start is locked, i.e.
there is no compensation iteration. 5. End of path during axis compensation stops the compensation. TX1250 35 Version: 1.1