Note: Once the UltraDiag VCI has been successfully connected to your UltraDiag via Bluetooth, the connection will be resumed automatically next time when you open the UltraDiag app. If not connected, manually tap of any screen with this icon to reconnect. 3.5.2 Wired VCI Connection Use the supplied USB cable to connect the UltraDiag VCI to the UltraDiag tablet (see Figure 3-6). After the UltraDiag VCI is properly connected to the tablet, the icon changes to . USB Type-A USB Type-C Figure 3-12 Note: Once wired connection is applied, Bluetooth will be disconnected automatically. 15