components and systems that are not continuously monitored. Component Test This function helps send control commands to the vehicle's ECU as a way to test and operate the system parts and components. Vehicle Information This function displays a list of information (provided by the vehicle manufacturer) from the vehicle’s ECU. The information may include: • VIN. • Calibration ID (CID). • Calibration Verification Number (CVN). • In-use performance tracking for spark ignition engines (IUPR) Vehicle Status This function displays the status of the vehicle, including Engine, Transmission, Codes Found, MIL Status, Monitors and Protocol.
4.2.3 Diagnostic Feedback The UltraDiag allows you to instantly send diagnostic feedback (with logs of diagnostic data automatically attached) while you are encountering a software problem with the diagnostics operations. To send diagnostic feedback: 1. Tap the icon located at the top right corner of any screen in the Diagnostics module. 2. Select the type of problem and tap Confirm . 3. Write a description of the problem. 4. Tap Submit to send the feedback. Note: The Diagnostic Feedback function is only available with the Diagnostics module. 4.3 IMMO (Immobilizer) The IMMO function allows you to configure the UltraDiag to work as a Key Programmer. To perform the IMMO functions: 1.
Tap IMMO from the home screen of the UltraDiag app. A list of vehicle makes will display. 28