PMAC Product Guide I{constant}={expression} Function : Assign a value to an I-variable Scope : Global Syntax : I{constant}[..{constant}]={expression} where {constant} is an integer from 0 to 1023 representing the number of the I-variable. the optional second {constant} must be at least as great as the first {constant} -- it represents the number of the end of the range. {expression} contains the value to be given to the specified I-Variables. This command assigns the value on the right side of the equals sign to the specified I-Variable or range of I-Variables.
If a motion or PLC program buffer is open when this command is sent to PMAC, the command will be entered into the buffer for later execution. Examples: I5=2 I130=1.25*I130 I22..44=0 I102=$C003 I104=I103 I{constant}=* Function : Assign factory default value to an I-Variable Scope : Global Syntax : I{constant}[..{constant}]=* where {constant} is an integer from 0 to 1023 representing the number of the I-Variable. the optional second {constant} must be at least as great as the first {constant} -- it represents the number of the end of the range. This command sets the specified I-variable or range of I-Variables to the factor default value. Each I- Variable has its own factory default.
These are shown in the I-Variable Specification section of this manual. Examples: I13=* I100..199=* INC Function : Specify incremental move mode Scope : Coordinate-system specific Syntax : INC INC({axis}[,{axis}...]) where {axis} is a letter (X, Y, Z, A, B, C, U, V, W) representing the axis to be specified, or the character R to specify radial vector mode. The INC command without arguments causes all subsequent positions for all axes in position motion commands to be treated as incremental distances. An INC statement with arguments causes the specified axes to be in incremental mode, and all others stay the way they were. The default axis specification is absolute. Online Commands 165