omron — UNDEFINE

PMAC Product Guide TYPE Function : Report type of PMAC Scope : Global Syntax : TYPE This command causes PMAC to return a string reporting the configuration of the card. It will report the configuration as a text string in the following format: {PMAC type},{Bus type},{Backup type},{Servo Type},{Ladder type},{Clock Multiplier} where {PMAC type}: PMAC1 First generation PMAC (including PMAC”1.5”) PMAC2 Second generation PMAC PMACUL Ultralite (MACRO only PMAC2) {Bus type}: ISA IBM-PC ISA bus VME VME bus STD STD bus ISA/VME PMAC1 firmware can support both busses {Backup type}: BATTERY Battery-backed RAM FLASH AMD-style flash-backed RAM I-FLASH Intel-style flash-backed RAM {Servo type}:

PID Standard PID servo algorithm ESA Option 6 Extended servo algorithm {Ladder type} {blank} no ladder-logic diagram support LDs Ladder-logic diagram support {Clock multiplier}: CLK Xn where n is the multiplication of crystal frequency to CPU frequency Examples: TYPE PMAC1, ISA/VME, BATTERY, PID, CLK X1 TYPE PMAC2, ISA, FLASH, ESA, CLK X3 TYPE PMACUL, VME, FLASH, PID, LDs, CLK X2 UNDEFINE Function : Erase coordinate system definition Scope : Coordinate-system specific Syntax : UNDEFINE UNDEF This command causes PMAC to erase all of the axis definition statements in the addressed coordinate system. It does not affect the axis definition statements in any other coordinate systems.

It can be useful before making new axis definitions. To erase the axis definition statement of a single motor only, use the #{constant}->0 command; to erase all the axis definition statements in every coordinate system, use the UNDEFINE ALL command. 192 Online Commands