omron — FRAX

PMAC Product Guide The units of velocity specified in an F command are scaled position units (as set by the axis definition statements) per time unit (defined by Feedrate Time Unit I-Variable for the coordinate system: Ix90). The velocity specified here is the vector velocity of all of the feedrate axes of the coordinate system. That is, the move time is calculated as the vector distance of the feedrate axes (square root of the sum of the squares of the individual axes), divided by the feedrate value specified here. The minimum effective feedrate value will provide a move time of 2 23 msec. The maximum effective feedrate value will provide a move time of 1 msec.

Any non-feedrate axes commanded to move on the same move-command line will move at the speed necessary to finish in this same amount of time. If the vector distance of a feedrate-specified move is so short that the computed move time (vector distance divided by feedrate) would be less than the acceleration time currently in force ( TA or 2* TS ), the move will take the full acceleration time instead, and the axes will move more slowly than specified by the F command Axes are designated as feedrate axes with the FRAX command. If no FRAX command is used, the default feedrate axes are the X, Y, and Z axes.

Any axis involved in circular interpolation is automatically a feedrate axis, regardless of whether it was specified in the latest FRAX command. In multi-axis systems, feedrate specification of moves is really only useful for systems with Cartesian geometries, for which these moves give a constant velocity in the plane or in 3D space, regardless of movement direction. Note: If only non-feedrate axes are commanded to move in a feedrate-specified move, PMAC will compute the vector distance, and so the move time as zero and will attempt to do the move in the acceleration time (TA or 2*TS), possibly limited by the maximum velocity and/or acceleration parameters for the motor(s).

This will probably be much faster than intended. Examples: F100 F31.25 F(Q10) F(SIN(P8*P9)) FRAX Function : Specify feedrate axes Type : Motion program (PROG and ROT) Syntax : FRAX [({axis}[,{axis}...])] where {axis} is a character (X, Y, Z, A, B, C, U, V, W) specifying which axis is to be used in the vector feedrate calculations. This command specifies which axes are to be involved in the vector-feedrate (velocity) calculations for upcoming feedrate-specified ( F ) moves. PMAC calculates the time for these moves as the vector distance (square root of the sum of the squares of the axis distances) of all the feedrate axes divided by the feedrate.

Any non-feedrate axes commanded on the same line will complete in the same amount of time, moving at whatever speed is necessary to cover the distance in that time. Vector feedrate has obvious geometrical meaning only in a Cartesian system, for which it results in constant tool speed regardless of direction, but it is possible to specify for non-Cartesian systems, and for more than three axes. Buffer Commands 215