omron — I{constant}={expression}

PMAC Product Guide Examples: HOMEZ1 ;These are motion program commands HMZ1,2,3 HOMEZ1..3,5..7 HMZ1..8 #1HOMEZ ;These are on-line commands #1HMZ,#2HMZ,#3HMZ I{data} Function : I-vector specification for circular moves or normal vectors Type : Motion program (PROG or ROT) Syntax : I{data} where {data} is a floating-point constant or expression representing the magnitude of the I-component of the vector in scaled user axis units. In circular moves, this specifies the component of the vector to the arc center that is parallel to the X-axis. The starting point of the vector is either the move start point (for INC (R) mode -- default) or the XYZ- origin (for ABS (R) mode).

In a NORMAL command, this specifies the component of the normal vector to the plane of circular interpolation and tool radius compensation that is parallel to the X-axis. Examples: X10 Y20 I5 J5 X(2*P1) I(P1) I33.333 specifies a full circle whose center is 33.333 units in the positive X-direction from the start and end point NORMAL I-1 specifies a vector normal to the YZ plane I{constant}={expression} Function : Set I-variable value Type : Motion program (PROG and ROT), PLC Program Syntax : I{constant}={expression} where {constant} is an integer value from 0 to 1023 representing the I-Variable number. {expression) represents the value to be assigned to the specified I-Variable.

This command sets the value of the specified I-Variable to that of the expression on the right side of the equals sign. The assignment is done as the line is processed, which usually in a motion program is one or two moves ahead of the move actually executing at the time (because of the need to calculate ahead in the program). For I-Variable value assignment to be synchronous with the beginning of the next move in the program, assign an M-Variable to the register of the I-Variable and use a synchronous M-Variable assignment statement ( M{constant}=={expression} ). Examples: I130=30000 I902=1 I131=P131+1000 Buffer Commands 219