User Manual of EM730 Series Inverter setting can be performed separately or in a mixed manner. Fig. 1-1 to Fig. 1-4 detail various input modes of the EM730 series inverter by speed setting. As shown in Fig. 1-1, speed setting of EM730 series inverter is mainly divided into the setting Fig. 1- 1Schematic Diagram of Speed Input Mode of main frequency source A setting (referred to as “main A”), setting of auxiliary frequency source B (referred to as “auxiliary B”), and setting of main and auxiliary operations. The final settings are made by simply adjustment and limitation (e.g. upper frequency limit, maximum frequency limit, direction limit, frequency hopping limit). See Figs.
1-2 to 1-4 for setting details. Fig. 1- 2 Schematic diagram of Setting of Main Frequency Source A As shown in Fig. 1-2, it is necessary to comprehensively consider the digital terminal setting and its status during the setting of the main frequency source A. Depending on the terminal settings, multi-segment speed operation can be performed or digital, analog, pulse or 15