User Manual of EM730 Series Inverter It is usually not necessary for DO to output certain statuses during jog running. The corresponding output can be shielded by setting the corresponding bit of this function code to 1. If F03.08=xxx1x is set and the FAR output is valid, the actually selected output terminal will not output the active level. of the function code F02.15. Table 7-7 This function code is subject to bit operation. For specific settings, refer to the description 193 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F03.08 Output status control in jog D7 D6 D5 D4 D3 D2 D1 D0 00000 〇 0x0308 * * * REV FDT 2 FDT 1 FAR RUN 0:
valid in jogging 1: invalid in jogging Function code Function code name Parameter description Unit Default setting Attribute F03.09 Y1 valid delay time 0.000~30.000 s 0.000 ● F03.10 Y1 invalid delay time 0.000~30.000 s 0.000 ● F03.13 R1 valid delay time 0.000~30.000 s 0.000 ● F03.14 R1 invalid delay time 0.000~30.000 s 0.000 ●