User Manual of EM730 Series Inverter 7.12 User-selected Parameter Group of F11 Group The keyboard of the EM730 series inverter supports the user-selected function. First, the user should select specific function codes by setting the parameters of the F11 group. Then the user-selected mode (--U--, as detailed in 4.2.2) can be enabled. The selected function codes can be switched cyclically by turning the digital potentiometer key . This function is mainly used where less than 32 specific function codes are involved, which can avoid the trouble caused by too many function codes.
256 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F11.00 User-selected parameter 1 The displayed content is Uxx.xx, which means that the Fxx.xx function code is selected. If the F11.00 function code is enabled, the keyboard will display U00.00, indicating the first optional parameter F00.00.
U00.00 ● 0x0B00 F11.01 User-selected parameter 2 U00.01 ● 0x0B01 F11.02 User-selected parameter 3 U00.02 ● 0x0B02 F11.03 User-selected parameter 4 U00.03 ● 0x0B03 F11.04 User-selected parameter 5 U00.04 ● 0x0B04 F11.05 User-selected parameter 6 U00.07 ● 0x0B05 F11.06 User-selected parameter 7 U00.14 ● 0x0B06 F11.07 User-selected parameter 8 U00.15 ● 0x0B07 F11.08 User-selected parameter 9 U00.16 ● 0x0B08 F11.09 User-selected parameter 10 U00.18 ● 0x0B09 F11.10 User-selected parameter 11 U00.19 ● 0x0B0A F11.11 User-selected parameter 12 U00.29 ● 0x0B0B F11.12 User-selected parameter 13 U02.00 ● 0x0B0C F11.13 User-selected parameter 14 U02.01 ● 0x0B0D F11.14 User-selected parameter 15 U02.02 ● 0x0B0E F11.15 User-selected parameter 16 U03.00 ● 0x0B0F