User Manual of EM760 High-Performance Inverter In order to avoid unnecessary danger caused by keyboard operation or misoperation of non- workers, the keyboard has a parameter locking function. The current function code is unlocked by default, and all function codes can be set. After the function code is debugged according to the working conditions, the parameters can be locked. ● 1: reference input not locked In the lock mode, all function codes cannot be modified, expect this function code and those with reference input properties. Specific function codes with parameter input properties are shown in the table below: Table 6-18 List of Function Codes with Reference Input Properties ● 2:
all locked, except for this function code In the lock mode, all function codes cannot be set except this function code. This mode is mostly used when it is not necessary to set parameters after debugging. We can only perform running, stop and parameter monitoring in this mode. to switch the parameters in cycles. The function codes F12.04 to F12.08 are used to select the parameters to be displayed in the cycle display queue. The selected items basically correspond to the monitoring parameter group ofthe F18 group, so you can directly view the current values ofall parameters in the F18 group. This function is mainly conducive to parameter display, especially during operation.
We can press the ESC key to enable the monitoring mode and right shift key 158 Function code Function codename Parameter description Unit Default setting Attribute F12.02 Parameter locking 0: do not lock 1: reference input not locked 2:
all locked, except for this function code 0 ● Function code Function codename Function code Function codename F00.07 Digital frequency setting F08.11 Multi-segment speed 12 F08.00 Multi-segment speed 1 F08.12 Multi-segment speed 13 F08.01 Multi-segment speed 2 F08.13 Multi-segment speed 14 F08.02 Multi-segment speed 3 F08.14 Multi-segment speed 15 F08.03 Multi-segment speed 4 F13.02 Digital torque setting F08.04 Multi-segment speed 5 F09.01 Digital PID setting F08.05 Multi-segment speed 6 F09.32 Multi-segment PID setting 1 F08.06 Multi-segment speed 7 F09.33 Multi-segment PID setting 2 F08.07 Multi-segment speed 8 F09.34 Multi-segment PID setting 3 F08.08 Multi-segment speed 9 F13.03 Multi-segment torque 1 F08.09 Multi- speed 10 F13.04 Multi-segment torque 2 F08.10 Multi-segment speed 11 F13.05 Multi-segment torque 3