User Manual of EM760 High-Performance Inverter Fig. 9-14 Use of Differential or push-pull complementary output encoder Instructions of frequency-dividing PG card: Upon proper installation of the PG card and power-on of the machine, the user can access the parameter sets F15.48 and F15.49 via the function code from the keyboard to specify the desired frequency divide-by-value. Frequency division ofup to 256 and down to none can be secured. Table 9-7 Setting codes of Frequency-dividing PG card functions: 9.4.3 UVW differential encoder PG card (EM760-PG-U1) Instructions on mechanical installation: ● Please install/remove the PG card only when the inverter is safely powered off.
● Please remove the screw ofthe PG card bracket ofthe inverter, and install either screw 1 or 2 as shown in the installation diagram. ● Please install the copper pillar supplied with the PG card to the position of the screw, and install the fixing screw for the PG card. 240 Function code Function codename Parameter description Unit Default setting Attribute F15.48 Divided frequencies of encoder 1~256 1 ● F15.49 High-frequency filtering coefficient of PG card 0~255 0 ● Specification and model Description Encoder interface EM760-PG-U1 UVW differential input PG card 15PIN wiring terminal