User Manual of EM760 High-Performance Inverter 293 5: Output voltage 6: bus voltage 7: output power 8: AI1 9: AI2 10: AI3 11: AI4 (expansion card) 12: High frequency pulse input (100.00% corresponds to the maximum frequency, and 0.00% corresponds to the minimum frequency) 13: Communication setting 1 14: count value 16: PID output 18: PID feedback 19: PID setting 30: Communication setting 2 31: Communication setting 3 32:
Speed loop output F03.24 Frequency corresponding to 100% of Y2 high frequency pulse output 0.00~100.00 kHz 50.00 ● 0x0318 F03.25 Frequency corresponding to 0% of Y2 high frequency pulse output 0.00~100.00 kHz 0.00 ● 0x0319 F03.26 Filtering time ofY2 high frequency pulse output 0.00~10.00 s 0.10 ● 0x031A F03.27 M1 output bias -100.0~100.0 % 0.0 ● 0x0311 F03.28 M1 output gain -9.999~9.999 1.000 ● 0x0312 F03.29 M2 output bias -100.0~100.0 % 0.0 ● 0x0313 F03.30 M2 output gain -9.999~9.999 1.000 ● 0x0314 F03.31 Control logic options of PLC output terminal D7 D 6 D5 D4 D3 D2 D1 D0 000000 ● 0x0315 * R 4 R3 * R2 R1 Y2 Y1 0: No output 1:
Output F03.32 Options of R3 output function (expansion card) For details, refer to introduction to F03.02 0 O 0x0316 F03.33 Options of R4 output function (expansion card) For details, refer to introduction to F03.02 0 O 0x0317 F03.34 Output type selection of analog quantity M1 0: 0~10V 1: 4~20mA 2: 0~20mA 0 O 0x0318 F03.35 Output type selection of analog quantity M2 1 O 0x0319 F04 Start/stop control parameter group