User Manual of EM760 High-Performance Inverter 343 F27.10 Feedforward range 3 Feedforward range 2 to feedforward range 4 % 37.00 ● 0x1B0A F27.11 Feedforward range 4 Feedforward range 3 to feedforward range 5 % 52.00 ● 0x1B0B F27.12 Feedforward range 5 Feedforward range 4 to 100.00 % 72.00 ● 0x1B0C F27.13 Soft start increment 0.00~50.00 %/S 0.60 ● 0x1B0D F27.14 Feedforward increment 1 0.00~50.00 %/S 0.11 ● 0x1B0E F27.15 Feedforward increment 2 0.00~50.00 %/S 0.30 ● 0x1B0F F27.16 Feedforward increment 3 0.00~50.00 %/S 0.75 ● 0x1B10 F27.17 Feedforward increment 4 0.00~50.00 %/S 1.55 ● 0x1B11 F27.18 Feedforward increment 5 0.00~50.00 %/S 4.00 ● 0x1B12 F27.19 Feedforward increment 6 0.00~50.00 %/S 11.00 ● 0x1B13 F27.20 Material cutoff control mode Ones place:
Disconnection detection mode 0: Automatic detection 1: External signal Tens place: Material cutoff detection control 0: Detect when the output is greater than the lower limit of material cutoff detection 1: no detection Hundreds place: Material cutoffhandling mode 0: Protection of terminal action only 1: Delayed stop and trip protection 2: Material cutoffprotection 3: Automatic reset after protection shutdown 4: Material cutoff detection terminal output only 5: Automatic reset of material cutoff detection terminal Thousands place: Brake mode 0: mode 0 1: mode 1 Myriabit: Reverse unwinding mode 0: No speed limit 1: Reverse speed limit by F27.24 01201 O 0x1B14