User Manual of EM760 High-Performance Inverter 4.2.1 Full menu mode to enter the Level 2 menu and select any function code. Then press the ENTER key In the full menu mode, press the ENTER key to enter the Level 3 menu and view or modify the function code. Except for a few special ones, the function codes needed by general users can be modified. In all menu modes, the user needs to press the ENTER key to save parameter modifications. to abandon parameter modifications:
ifthe function code is equal to the unmodified value, directly exit the Level 3 menu and go back to the Level 2 menu; otherwise, the unmodified value will be restored and displayed, and the user can press the ESC key In the Level 3 menu, press the ESC key to exit the Level 3 menu and go back to the Level 2 menu. Quick positioning function: The full menu mode displays all groups of function codes and quick positioning can facilitate operations. To locate a function code, it is only required to set the function code to display and press the ENTER key to display the function code.
The process of changing the value of the function code F03.02 to 10 from the initial status upon power-on in the full menu mode is shown in the following figure. In level 2 menu, the number of function code groups can be known through the function code progress indication. As shown in the following figure, 02/36 means group F03 consists of 36 function codes, and the cursor is currently located at F03.02. 62