Appendix-1 Parameter List Extended Function Mode Appendix * 2nd control is displayed when '08 (2nd control)' is allocated to one of multi-function inputs from C001 to C006. App-3 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Set value Basic setting A001 Frequency reference selection 00: Digital Operator (FREQ adjuster) 01: Terminal 02: Digital Operator (F001) 03: Modbus communication 10: Frequency operation result 00 No A201 *2nd frequency reference selection 00 No A002 RUN command selection 01: Terminal 02: Digital Operator 03: Modbus communication 02 No A202 *2nd RUN command selection 02 No A003 Base frequency 30.
to Max. frequency [A004] 60. No Hz A203 *2nd base frequency 30 to Max. frequency [A204] 60. A004 Maximum frequency 30. to 400. 60. No Hz A204 *2nd maximum frequency 60. Analog input A005 FV/FI selection 00: Switches between FV/FI via terminal AT 01: Disabled (Outputs FV+FI) 02: Switches between FV/VR via terminal AT 03: Switches between FI/VR via terminal AT 00 No A011 FV start frequency 0.0 to Max. frequency 0.0 No Hz A012 FV end frequency 0.0 to Max. frequency 0.0 No Hz A013 FV start ratio 0. to 100. 0. No % A014 FV end ratio 0. to 100. 100. No % A015 FV start selection 00: External start frequency (A011 set value) 01: 0 Hz 01 No A016 FV, FI sampling 1. to 17. 8. No