3-7 Parameter List 3 Operation * 2nd control is displayed when '08 (2nd control)' is allocated to one of multi-function inputs from C001 to C006. 3-28 Parameter No. Function name Monitor or data range (Digital Operator) Default setting Changes during operation Unit Page Electronic thermal b012 Electronic thermal level 0.2 × Rated current to 1.2 × Rated current Rated current No A 4-27 b212 *2nd electronic thermal level Rated current b013 Electronic thermal characteristics selection 00: Reduced torque characteristics 1 01: Constant torque characteristics 02:
Reduced torque characteristics 2 00 No 4-27 b213 *2nd electronic thermal characteristics selection 00 Overload limit b021 Overload limit selection 00: Disabled 01: Enabled in acceleration/constant speed operation 02: Enabled in constant speed operation 01 No 4-29 b221 *2nd overload limit selection 01 b022 Overload limit level 0.1 x Rated current to 1.5 x Rated current 1.5 × Rated current No A 4-29 b222 *2nd overload limit level 1.5 × Rated current b023 Overload limit parameter 0.1 to 3000.0 1.0 No s 4-29 b223 *2nd overload limit parameter 1.0 b028 Overload limit source selection 00: b022, b222 set values 01:
Input terminal FV 00 No 4-29 b228 *2nd overload limit source selection 00 Lock b031 Soft lock selection 00: Data other than b031 cannot be changed when terminal SFT is ON. 01: Data other than b031 and the specified frequency parameter cannot be changed when terminal SFT is ON. 02: Data other than b031 cannot be changed. 03: Data other than b031 and the specified frequency parameter cannot be changed. 10: Data other than parameters changeable during operation cannot be changed. 01 No 4-30 Others b080 AM adjustment 0. to 255. (Shared with C086 for AM offset adjustment) 100.
Yes 4-31 4-62 b082 Starting frequency 0.5 to 9.9 0.5 No Hz 4-31 b083 Carrier frequency 2.0 to 14.0 5.0 No kHz 4-32 4-34 4-63