Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview The control panel on the 4021M-T2R+/4021M-82R+ has several LEDs and two buttons. There are also two LEDs on each SATA/SCSI drive carrier. These LEDs keep you constantly informed of the overall status of the system and the activity and health of specifi c components. 3-2 Control Panel Buttons There are two push-buttons located on the front of the chassis. These are (in order from left to right) a power on/off button and a reset button. POWER: This is the main power button, which is used to apply or turn off the main system power.
Turning off system power with this button removes the main power but keeps standby power supplied to the system. RESET: Use the reset button to reboot the system. 3-1