— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 5: Advanced Serverboard Setup S/PDIF_Out Connector An S/PDIF_Out connector is located next to the Backpanel USB ports on the motherboard. The S/PDIF(Sony/ Philips Digital Interface Format) con- nector is used for transporting stereo digital audio signals. It is commonly used to connect the output of a DVD player to a home theater receiver that supports Dolby Digital or DTS surround sound. The S/PDIF_Out connector includes the top compo- nent (S/PDIF_RCA) and the bottom component (S/PDIF). See the tables below for pin defi nitions. Overheat/Fan Fail LED (JOH1 ) The JOH1 header is used to connect an LED to provide warnings of chas- sis overheat.

This LED will also blink to indicate a fan failure. Refer to the table on right for pin defi nitions. Power Supply I 2 C Connector The Power Supply (I 2 C) connector can be used to monitor the status of the power supply, fan and system temperature. See the table on the right for pin defi nitions. 5-19 Overheat LED Pin Defi nitions Pin# Defi nition 1 5vDC 2 OH Active PWR Supply I2C Pin Defi nitions (SMB PS) _ Pin# Defi nition 1 Clock 2 Data 3 PWR Fail 4 Ground