— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 7: BIOS Wait For 'F1' If Error This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are Disabled and Enabled . Hit 'Del' Message Display This feature displays "Press DEL to run Setup" during POST. The options are Enabled and Disabled. Watch Dog Function If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled. Restore on AC Power Loss Use this feature to set the power state after a power outage. Select Power-Off for the system power to remain off after a power loss. Select Power-On for the system power to be turned on after a power loss.

Select Last State to allow the system to resume its last state before a power loss. The options are Power-On, Power-Off and Last State . Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives attached to these adaptors will not function as bootable devices. The options are Enabled and Disabled.

X Processor & Clock Options When you fi rst enter the Processor and Clock Options, the current processor and clock confi guration is displayed. Below it are the different options that can be modifi ed: Ratio CMOS Setting This option allows the user to set the ratio between the CPU Core Clock and the FSB Frequency. ( Note : if an invalid ratio is entered, the AMI BIOS will restore the setting to the previous state.) The default setting depends on what type of CPU is installed. For example, the default setting for the Intel® Core i7™ 965 is [24] . Press "+" or "-" on your keyboard to change this value. 7-5