— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 7: BIOS X IDE / Floppy Confi guration When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE Devices and displays the following items: Floppy A This feature allows the user to select the type of fl oppy drive connected to the sys- tem. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3 1/2", 1.44MB 3 1/2" and 2.88MB 3 1/2". SATA#1 Confi guration If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while selecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compatible, Enhanced Confi gure SATA#1 As This feature allows the user to select the drive type for SATA#1. The options are IDE, RAID and AHCI.

ICH RAID CodeBase (Available if RAID is selected above) HostRAID Utility. The options are Intel and Adaptec. Select Intel to enable the Intel SATA Host RAID Utility. Select Intel to use the Intel Max Ports on SATA#1 (Available if either RAID or AHCI is enabled under "Confi gure SATA#1 as" above) The options are 4 Ports and 6 Ports . SATA#2 Confi guration Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled, Enhanced IDE Detect Timeout (sec) Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35 .

AHCI CD/DVD Boot Timeout Use this feature to set the time-out value for the BIOS to detect the AHCI CD/DVD boot devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35 . 7-13