— Supermicro SuperWorkstation 5046A-X User's Manual (1.0a)

Chapter 7: BIOS X ACPI Confi guration Use this feature to confi gure ACPI (Advanced Confi guration and Power Interface) power management settings for your system. USB Device Wake-Up This feature is used to awaken from Standby mode by a universal serial bus (USB) device (such as, a USB mouse or USB keyboard). The options are Enabled and Disabled . PS2 KB/MS Wake-Up This feature is used to awaken from Standby mode by a PS/2 mouse or PS/2 keyboard. The options are Enabled and Disabled . ACPI Aware O/S Enable ACPI support if it is supported by the OS to control ACPI through the Op- erating System. Otherwise, disable this feature. The options are Yes and No.

Suspend Mode This option is used to select the ACPI State that is used for system suspend. The options are S1 (POS) , S3 (STR) and Auto. S1 (POS) - All processor caches are erased, and stops executing in- structions. Power to the CPU(s) and RAM is maintained, but RAM is refreshed. S3 (STR) - The CPU has no power and the power supply goes on reduced power mode. However, main memory (RAM) is still powered. Headless Mode This feature is used to enable system to function without a keyboard, monitor or mouse attached The options are Enabled and Disabled . ACPI Version Features The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further explanation:

http://www.acpi.info/ X Event Log Confi guration View Event Log Use this option to view the System Event Log. Mark all events as read This option marks all events as read. The options are OK and Cancel . 7-19