Supermicro H8QG6+-F / H8QGi+-F — Supermicro H8QG6+-F / H8QGi+-F Serverboard User Manual PDF

Chapter 2: Installation Serial Ports The COM1 serial port is located beside the VGA port. Refer to the motherboard layout for the location of the COM2 header. See the table on the right for pin defi nitions. Note: NC indicates no connection. Wake-On-LAN The Wake-On-LAN header is designated JWOL. See the table on the right for pin defi nitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake- On-LAN feature. SMBus Header The header at SMBus is for the System Management Bus. Connect the appropriate cable here to utilize SMB on the system. See the table on the right for pin defi nitions.

The Power System Management Bus ( I2 C) connector (JPI2C1) monitors the power suppply, fan and system temperatures. See the table on the right for pin defi nitions. Power SMB (I 2 C) 2-17 Serial Port Pin Defi nitions (COM1/COM2) Pin# Defi nition Pin# Defi nition 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 Ground 10 NC Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up SMBus Header (SMBus) Pin Defi nitions (JSMB1) Pin# Defi nition 1 Data 2 Ground 3 Clock 4 No Connection Power SMB I2C Pin Defi nitions (JPI2C) Pin# Defi nition 1 Clock 2 Data 3 PWR Fail 4 Ground 5 +3.3V