Supermicro H8QG6+-F / H8QGi+-F — Supermicro H8QG6+-F / H8QGi+-F Serverboard User Manual PDF

Chapter 2: Installation The RAID Utility program allows you to defi ne the drives you want to include in the RAID array and the mode and type of RAID. Using the DotHill and Adaptec RAID Utility Installing the RAID Driver During OS Installation You may also use the procedure below to install the RAID driver during the Windows OS installation: 1. With the Windows OS installation CD-ROM in the CD drive, restart the system. 2. Press again to continue with the Windows setup. 3. When you see the prompt, hit the key to enter Windows setup. 4. Eventually a blue screen will appear with a message that begins “Windows could not determine the type of one or more storage devices . .

.” When you see the screen, hit the key to “Specify Additional Device”, then insert the driver diskette you just created into the fl oppy drive. 5. Highlight “Manufuacturer Supplied Hardware Support Disk” and hit the key. 6. Highlight the fi rst “Adaptec RAID” driver shown and press the key to install it. 2-29