Chapter 4: BIOS The Default Alarm (default setting) is enabled when the Tctl value = 70, and is disabled when the Tctl value drops from 70 to 67. When COA (either Early or Default Alarm) is enabled , the following actions are required to be executed: System overheating LED is required to be ON and to solid red. Onboard buzzer or speaker is required to be ON and to be a continuous sound. All system fans are required to be operated at full speed. System monitoring software (such as Super Doctor and IPMI if available) is required to report and record CPU overheating events in the event logs. When COA (either Early or Default Alarm) is disabled, the following actions are required to be executed:
System overheating LED is required to be OFF. Onboard buzzer or speaker is required to be OFF. All system fans are required to be returned to a normal, non-CPU-overheating LFSC condition. System Fan Monitor This submenu contains lists the system fans and contains RPM information for them. Fan Speed Control Modes This submenu allows you to determine how the system will control the speed of the onboard fans. The options are Full Speed/FS (Max Cooling), Performance/ PF (Better Cooling), Balanced/BL (Balance between performance and energy saving), Energy Saving/ES (Lower Power and Noise). A display also showing the speeds of FAN1 Speed ~ FAN11 Speed is shown on this page.
4-11 Condition When a CPU is overheating Front Panel Overheating LED On and Solid Red Onboard Buzzer or Speaker On and Continuous Sound System Fan Speed Controls Full Speed BMC Report PROCHOT BMC Event Log Record PROCHOT Super Doctor Report PROCHOT Super Doctor Event Log Record PROCHOT