Super Micro Computer, Inc. MNL-H8DGT-HF-HIBQF - SR56x0 — Super Micro H8DGT-HF/HIBQF Motherboard User Manual PDF

H8DGT-HF/HIBQF Serverboard User’s Manual DRAM ECC Enable This setting allows hardware to report and correct memory errors automatically, maintaining system integrity. Options are Enabled or Disabled. DRAM Timing Confi guration DRAM Timing Confi g This setting specifi es the DRAM timing confi guration. Options are Auto and Manual. Memory Timing Parameters This selects the which node's timing parameters to display. Options include CPU Node 0 , CPU Node 1, CPU Node 2 or CPU Node 3. IOMMU This setting is used to enable or disable or set the GART size in systems without AGP. Options include Enabled and Disabled .

These settings allow you to either Enable or Disable functions for OHCI or EHCI bus devices. OHCI/EHCI HC Device Functions USB 2.0 Controller Mode Use this setting to confi gure the USB 2.0 Controller in either Hi-Speed (480 Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mode) or Disabled (Full Speed Mode). Legacy USB Support Select "Enabled" to enable the support for USB Legacy. Disable Legacy support if there are no USB devices installed in the system. "Auto" disabled Legacy support if no USB devices are connected. The options are Disabled, Enabled and Auto . 4-6