Super Micro Computer, Inc. MNL-H8DGT-HF-HIBQF - SR56x0 — Super Micro H8DGT-HF/HIBQF Motherboard User Manual PDF

H8DGT-HF/HIBQF Serverboard User’s Manual SuperIO Device Confi guration Serial 1 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 1. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to Disabled , the serial port physically becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. Options include Disabled, 3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3 Serial 2 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 2.

Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable. Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt address. Options include Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2F8/IRQ3. Serial Port 2 Attribute This option allows you to set COM2 as a normal serial port or as virtual COM for SOL. Options are SOL or COM. Remote Access Confi guration Remote Access Use this option to Enable or Disable Remote Access in your system. If enabled, the settings below will appear.

Serial Port Number Use this setting to select the serial port for console redirection. Options include COM1, COM2* . The displayed base address and IRQ for the serial port changes to refl ect the selection you make. Note: Make sure the selected port is enabled. Serial Port Mode Selects the serial port settings to use. Options are (115200 8, n, 1) , (57600 8, n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1). 4-10