Appendix-1 Parameter List Appendix * 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001 to C008. App-7 Parameter No. Function name Monitor or data range Default setting Changes during operation Unit Set value Multi-step speed, Jogging A038 Jogging frequency 0.00/Starting frequency to 9.99 6.00 Yes Hz A039 Jogging stop selection 00: Free running on jogging stop/ Disabled in operation 01: Deceleration stop on jogging stop/ Disabled in operation 02: DC injection braking on jogging stop/ Disabled in operation 03: Free running on jogging stop/ Enabled in operation 04: Deceleration stop on jogging stop/ Enabled in operation 05:
DC injection braking on jogging stop/ Enabled in operation 00 No V/f characteristics A041 Torque boost selection 00: Manual torque boost 01: Automatic torque boost 00 No A241 * 2nd torque boost selection 00 A042 Manual torque boost voltage 0.0 to 20.0 1.0 Yes % A242 * 2nd manual torque boost voltage 1.0 A342 * 3rd manual torque boost voltage 1.0 A043 Manual torque boost frequency 0.0 to 50.0 5.0 Yes % A243 * 2nd manual torque boost frequency 5.0 A343 * 3rd manual torque boost frequency 5.0 A044 V/f characteristics selection 00: Constant torque characteristics (VC) 01: Special reduced torque characteristics (special VP) 02: Free V/f characteristics 03: Sensorless vector control (SLV) 04:
0-Hz sensorless vector control 05: Sensor vector control (V2) 00 No A244 * 2nd V/f characteristics selection 00: Constant torque characteristics (VC) 01: Special reduced torque characteristics (special VP) 02: Free V/f characteristics 03: Sensorless vector control (SLV) 04: 0-Hz sensorless vector control 00 A344 * 3rd V/f characteristics selection 00: Constant torque characteristics (VC) 01: Special reduced torque characteristics (special VP) 00 A045 Output voltage gain 20. to 100. 100. Yes %