3-5 Keys 3-5 Keys 3 Operation 3-12 Name Description Mode key Switches between the command setting and the data setting, and between the function mode and the extended function mode. With this key, you can always change the display as follows: [Supplemental Information] To jump to "d001" from any function mode, hold down the Mode key for 3 seconds. k5k8.1 or fk0k0k1 5k8.0 fk0k0k1 5k7.9 Note: Always press the Enter key to store any changed data. Increment key Changes the set values, parameters, and commands. Decrement key RUN key Starts the operation. Forward/Reverse rotation depends on the "F004" setting. STOP/RESET key Stops the operation. Functions as a reset key if an error occurs.
Enter key Enters and stores changed data. Do not press the Enter key if you don't want to store any changes, for example, if you change the data inadvertently.