Power and IO Cable The HRS6-AV-6-2M can be used as the standard Power and IO Cable. The pinout and wire colors for this cable are shown below. GigE Camera Pinouts IO Table The pin assignments for the GigE cameras are shown in the table below. Line0 – Opto Isolated Trigger Input. Pin2 Line1 – Opto Isolated Strobe Output. Pin4 Common – Opto Isolated Common used for Trigger and Strobe. Pin 5 Power IN/GND – Pin 1 and Pin 6 Note: Power can also be supplied though PoE Ethernet cable. Using Sentech STC-M Cameras with AutoVISION and Visionscape Page 24 of 32