D.5 User Setting Table Standards Compliance D OYMC TOEP C71060622-01-OY V1000 User Manual 419 No.
Name User Setting b6-01 Dwell Reference at Start b6-02 Dwell Time at Start b6-03 Dwell Frequency at Stop b6-04 Dwell Time at Stop b8-01 Energy Saving Control Selection b8-02 Energy Saving Gain b8-03 Energy Saving Control Filter Time Constant b8-04 Energy Saving Coefficient Value b8-05 Power Detection Filter Time b8-06 Search Operation Voltage Limit C1-01 Acceleration Time 1 C1-02 Deceleration Time 1 C1-03 Acceleration Time 2 C1-04 Deceleration Time 2 C1-05 Acceleration Time 3 (Motor 2 Accel Time 1) C1-06 Deceleration Time 3 (Motor 2 Decel Time 1) C1-07 Acceleration Time 4 (Motor 2 Accel Time 2) C1-08 Deceleration Time 4 (Motor 2 Decel Time 2) C1-09 Fast-Stop Time C1-10 Accel/Decel Time Setting Units C1-11 Accel/Decel Time Switching Frequency C2-01 S-Curve Characteristic at Accel Start No.
Name User Setting b5-01 PID Function Setting b5-02 Proportional Gain Setting (P) b5-03 Integral Time Setting (I) b5-04 Integral Limit Setting b5-05 Derivative Time b5-06 PID Output Limit b5-07 PID Offset Adjustment b5-08 PID Primary Delay Time Constant b5-09 PID Output Level Selection b5-10 PID Output Gain Setting b5-11 PID Output Reverse Selection b5-12 PID Feedback Reference Missing Detection Selection b5-13 PID Feedback Loss Detection Level b5-14 PID Feedback Loss Detection Time b5-15 PID Sleep Function Start Level b5-16 PID Sleep Delay Time b5-17 PID Accel/Decel Time b5-18 PID Setpoint Selection b5-19 PID Setpoint Value b5-20 PID Setpoint Scaling b5-34 PID Output Lower Limit b5-35 PID Input Limit b5-36 PID Feedback High Detection Level b5-37 PID Feedback High Level Detection Time b5-38 PID Setpoint / User Display b5-39 PID Setpoint and Display Digits