D.5 User Setting Table 422 OYMC TOEP C71060622-01-OY V1000 User Manual No.
Name User Setting E4-02 Motor 2 Rated Slip E4-03 Motor 2 Rated No-Load Current E4-04 Motor 2 Motor Poles E4-05 Motor 2 Line-to-Line Resistance E4-06 Motor 2 Leakage Inductance E4-07 Motor 2 Motor Iron-Core Saturation Coefficient 1 E4-08 Motor 2 Motor Iron-Core Saturation Coefficient 2 E4-09 Motor 2 Mechanical Loss E4-10 Motor 2 Iron Loss E4-11 Motor 2 Rated Capacity E4-12 Motor 2 Iron-Core Saturation Coefficient 3 E4-14 Motor 2 Slip Compensation Gain E4-15 Torque Compensation Gain - Motor 2 E5-01 Motor Code Selection (PM motor) E5-02 Motor Rated Capacity (PM motor) E5-03 Motor Rated Current (PM motor) E5-04 Motor Poles (PM motor) E5-05 Motor Armature Resistance (PM motor) E5-06 Motor d Axis Inductance (PM motor) E5-07 Motor q Axis Inductance (PM motor) E5-09 Motor Induction Voltage Constant 1 (PM motor) No.
Name User Setting E5-24 Motor Induction Voltage Constant 2 (PM motor) F1-02 Operation Selection at PG Open Circuit (PGO) F1-03 Operation Selection at Overspeed (OS) (for Simple PG V/f) F1-04 Operation Selection at Deviation (for Simple PG V/f Control) F1-08 Overspeed Detection Level (for Simple PG V/f Control) F1-09 Overspeed Detection Delay Time (for Simple PG V/f Control) F1-10 Excessive Speed Deviation Detection Level (for Simple PG V/f Control) F1-11 Excessive Speed Deviation Detection Delay Time (for Simple PG V/f Control) F1-14 PG Open-Circuit Detection Time (for Simple PG V/f Control) F6-01 to F6-41 Range reserved F6-01 Communications Error operation Selection F6-02 External fault from comm.
option selection F6-03 External fault from comm. option operation selection F6-04 Trace Sampling Rate F6-10 CC-Link Node Address F6-11 CC-Link communications speed