3.8 I/O Connections 3.8 I/O Connections ◆ Sinking/Sourcing Mode Switch Set the DIP switch S3 on the front of the drive to switch the digital input terminal logic between sinking mode and sourcing mode; the drive is preset to sinking mode. Electrical Installation Table 3.11 Sinking/Sourcing Mode Setting Figure 3.22 DIP Switch S3 3 SINK SOURCE Figure 3.22 DIP Switch S3 When controlling the digital inputs by NPN transistors (0 V common / sinking mode), set the DIP switch S3 to SINK and use the internal 24 V power supply. ■ Transistor Input Signal Using 0 V Common/Sink Mode OYMC TOEP C71060622-01-OY V1000 User Manual 73 Set Value Details SINK Sinking Mode (0 V common):
factory setting SOURCE Sourcing Mode (+24 V common)