omron — LO/RE LED and RUN LED Indications

4.2 Using the Digital LED Operator ◆ LED Screen Displays As ◆ For the difference between “flashing” and “flashing in short intervals” of the RUN LED, refer to Figure 4.2, RUN LED and Drive Operation. 90 OYMC TOEP C71060622-01-OY V1000 User Manual play Lit Flashing Off When the drive detects a alarm or error • When an alarm occurs • OPE detected • When a fault or error occurs during Auto-Tuning Normal state (no fault or alarm) EV Motor is rotating in reverse — Motor is rotating forward Drive Mode When FBD’s are used Programming Mode Auto-Tuning Displays output frequency (Hz) — — rated in manual efer to the FDB’s instruction manual for furthe r information.

LO/RE LED and RUN LED Indicatio ns D Lit Flashing Flas hing Quickly Off When run command is selected from LE operator (LOCAL) D — — Run command is selected from device other than LED operator (REMOTE) During run • During deceleration to • Duri stop a fas • When a run command • Duri is input and frequency • Duri reference is 0 inter ng deceleration at t-stop. ng deceleration ng stop by lock operation. During stop own