Step 3: Try starting the vehicle. If it fails, disconnect the clamps from the vehicle's battery and wait for 20 seconds, then reconnect and try again. Do not attempt more than 3 consecutive jump starts within 2 minutes. Note: • The jump starter has a built-in buzzer that will ring when reverse polarity, over temperature, short circuit, or other improper connections are detected. Disconnect the clamps from the battery if the buzzer rings and connect them again after the issue is resolved. • If the status indicator doesn't turn on, press the BOOST Button to enable the forced output mode. Step 4:
After successfully jumpstarting the vehicle, remove the clamps from vehicle battery and separate the clamps and jump starter. Your jump starter will automatically power off after a few seconds. 12