Note: V4500 Plus can only be used to jump start vehicles powered by 12V lead-acid batteries. 4.2 Jump Starting a Vehicle V4500 Plus offers two modes: Jump Start and BOOST. Jump Start Mode 1. Press the button to power on V4500 Plus. 2. Press the button to toggle between the , and icons for selection. M The selected icon will turn ON and blink. 3. Select the icon and press to confirm your selection. ok The icon will become solid ON. The icon will turn ON and blink. It means you need to connect the jump start clamps to the vehicle battery. 4. Connect the jump start clamps (on the left and right sides of V4500 Plus) to the vehicle battery.
The red clamp goes with the positive (+) terminal of the battery, and the black clamp goes with the negative (-) terminal of the battery. When V4500 Plus detects that the connection of the jump start clamps to the vehicle battery is OK (with the voltage ≥ 3V), the icon will become solid ON and the icon will turn ON and blink. It means you need to start the vehicle. If the voltage is lower than 3V, the vehicle will not get started successfully in this mode. You can try the BOOST mode. 10