VEDA HCT User Manual Subtract At each time of operation, the set data will be subtracted from the word register. Lower Limit It is the lower limit of the word register operated. When the result reached the lower limit of operation, no further “Subtract” operation can be done. Looping If “Looping” is checked, an option of “Upper limit” will appear. The operation will be continued at the lower limit and the subtraction will be done from the upper limit. For example, if the “Lower limit” is set to “0”, the “Subtract” is set to “1”, and the upper limit is set to “100”, the Word Set component will be valid when it is subtracted to “0”.
It will turn to 100, 99, 98, 97,and so on, at the next operations. Reverse on reaching the end If “Reverse on reaching the end” is checked, the operation will be continued at the lower limit and the result will change to add from the lower limit to the upper limit. When the result reached the upper limit, the operation will change to subtract. Increase The result value will keep increasing if the component of “Increase” is pressed down. The increasing will stop if the component of “Increase” is released or the value reaches the upper limit. The component of “Increase” has attributes of “Immediately Execute Increase/Decrease Action”, “Delaying Time” and “Execution Time”. 101