Chapter 2 System Components Status Indicators The top of the Vision HAWK Smart Camera has multiple LEDs that indicate different trigger, inspection, camera, communication, and power states. Additional User Feedback • Green Flash – A green flash from the front of the unit indicates a Good Read. • Red X Targeting Pattern – The red X targeting pattern from the front of the unit allows the user to center an object in the camera’s field of view. • Beeper – The beeper is an audible verification that either a Pass or a Fail has occurred.
2-20 Vision HAWK Smart Camera Guide TRIG = Trigger Status PASS/FAIL = Inspection Status MODE = Camera Status LINK/ACT = Link Activity Status Outputs 1, 2, 3 Power Status TRIG On Steady Continuous Trigger Off Waiting for Trigger Event On Flashing Trigger Event PASS/FAIL On Active State Off Inactive State MODE On Steady Unit Ready Off Unit Not Ready LINK/ACT On Steady Link Established Off No Link/Activity On Flashing Link Established and Activity on Link PWR On Power On Off No Power Applied to Unit OUTPUTS On Signal Sent to External Output Off No Signal Sent to External Output