3 Illumination Optics and Lighting Wiring for Continuous Illumination Warning: Contact between Pin 5 (gray wire) and any ground or voltage source less than or equal to 3.5VDC may cause erratic operation in this configuration. Contact between Pin 5 (gray wire) and any voltage source greater than 3.5VDC will damage the illuminator. Smart Series Illuminator Connector Vision HAWK Connector A to to to to to * Insulate Pin 5 (gray wire) Vision HAWK Smart Camera Guide 3-11 Smart Series Illuminator Pin Signal Name 1 +24VDC 2 Trigger – 3 DC Ground 4 Trigger + 5 Dim Vision HAWK (Connector A) Pin Signal Name 2 Power 7 Ground 7 Ground 2 Power No Connection* N/A