Appendix A Connector Pinouts Vision MINI Smart Camera Connectors USB and I/O Cable Figure A–1 shows the location of the USB and I/O cable. FIGURE A–1. USB and I/O Cable USB / I/O Cable (attached) TABLE A–1. and TABLE A-2. describe the USB and I/O cable signals. TABLE A–1.
USB and I/O Cable Pin Assignments (15-pin D-sub Socket) A-2 Vision MINI Smart Camera Guide Pin Host RS-232 In/Out 1 Power +5VDC In 2 TxD Out 3 RxD In 4 Power/Signal Ground 5 NC 6 NC 7 Output 1 TTL (Can sink 10mA and souce 10mA) Out 8 Default configuration (activated by connecting pin 8 to ground pin 4) In 9 Trigger In 10 NC In 11 Output 3 TTL (Can sink 10mA and souce 10mA) Out 12 Learn (NPN) In 13 Chassis ground (Connects chassis body to earth ground only. Do not use as power or signal return.) 14 Output 2 TTL (Can sink 10mA and souce 10mA) Out 15 NC