Appendix D Serial Commands INFO [tagname|service] Gets information about a tag or service. INFO with no arguments gets a list of services. INFO gets a list of tags in that service. INFO gets attributes of the tag as well as a list of subtags. The AVP service allows retrieval of step and datum information from the job tree using forward slash ‘ / ’ in the symbolic name path. INFO avp/insp1/snapshot1/status paths are not case-sensitive and do not need to be fully qualified if unique. INFO avp/snapshot1/status will return the same result if there is only one inspection.
When issued against a step, INFO avp/snapshot1 returns properties of the step, a list of child datums, and a list of child steps. Child steps are indicated by a trailing forward slash. QUERYAUTOCAL Returns photometry settings: Gain, Exposure, and Focus. AUTOCAL Performs automatic calibration of photometry settings: Gain, Exposure, and Focus. TARGET {0|1|off|on} Turns targeting LEDs On or Off. target 1 = Turn Target On target 0 = Turn Target Off CHECKSUM {BOOT | KERNEL | BOOTPARAM} Gets a checksum on an individual part of the system. HELP Returns a list of all serial commands showing correct syntax and functionality descriptions. D-6 Vision MINI Smart Camera Guide