Changing the Calibration Mode of AOS Camera Calibration The following describes a program that changes the calibration mode of AOS camera calibration to automatic calibration so that AOS camera calibration can be executed during measurement. 58 5 If the date of calibration of the camera matches the internal date of the FH series, execute the sample program (FHSMPLMAIN) without executing camera calibration. * This processing is included in the FHSAMPLE CALIBAOS subflow. _ If calibration is not required, execute the sample program (FHSAMPLEMAIN). 1 In the Edit project window, select the FHSAMPLE CALIBAOS subflow.
_ 2 To change the camera calibration mode to automatic calibration, set the variable to determine the operation of SetCalibMode to 1, and execute the SetCalibMode subflow. SetCalibMode SubFlow 3 In the Edit project window, select the SetCalibMode subflow. 4 Select the SetCalibMode node on the flow, and click the pencil icon to open the setting window. fhrunsendcmd Component ▼