19 controller for creating a new project]. Enter the project name and project save destination on the "Project name" screen and click the [Next] button. On the "Communication Setting" window, select "Ethernet" and enter the robot controller's IP address. After this selection, confirm that the robot controller and PC are connected by a LAN cable, and click the [Next] button. Select [Do nothing] in the operation selection field after project creation on the "Done" screen and press the "Finish" button to create a project. From the WINCAPSIII [Project] menu, select [Add Existing File]. Select a robot program in the folder outputted by using the data set output tool for the robot vision.
From the WINCAPSIII [Connect] menu, select [Transfer data]. Check the imported robot program and press the [Send] button. 6 7 Touch the [F6 Setting] button