VLT ® 2900 Series If Active [1] is selected, the user-defined Quick Menu is active. [Index 1 - 20] Value: 0 - 999 In this parameter you define which parameters are re- quired in the Quick Menu when parameter 024 User- defined Quick Menu is set to Active [1]. Up to 20 parameters can be selected for the user-de- fined Quick Menu. 000 NB! Please note that this parameter can only be set using an LCP 2 control panel. See Order form . The Quick Menu is set up as follows: 1. Select parameter 025 Quick Menu setup and press [CHANGE DATA]. 2. Index 1 indicates the first parameter in Quick Menu. You can scroll between the index numbers using the [+ / -] keys. Select Index 1. 3.
Using [ ] you can scroll between the three figures. Press the [ number in the parameter number can be se- lected using the [+ / -] keys. Set Index 1 to 100 for parameter 100 Configuration . 4. Press [OK] when Index 1 has been set to 100. 5. Repeat steps 2 - 4 until all parameters re- quired have been set to the Quick Menu key. 6. Press [OK] to complete the Quick Menu set- up. If parameter 100 Configuration is selected at Index 1, Quick Menu will start with this parameter every time Quick Menu is activated. Please note that parameter 024 User-defined Quick Menu and parameter 025 Quick Menu setup are reset to the factory setting during initialisation.
18 MG.29.A3.02 - VLT ® is a registered Danfoss trademark 025 Quick Menu setup (quick menu setup) Value: Function: Description of choice: